If you pulling the steering wheel, it should wiggle off but if your trying
to pull the steering shaft, I think I had to remove an Allen bolt on the
side of the shaft housing that prevents the shaft from coming out. The one I
was working on had a stripped bolt so we had to drill it out.
-----Original Message-----
From: Scott Donnelly / Journey's End Marina <oharajem(at)free.midcoast.com>
To: alpines(at)autox.team.net <alpines(at)autox.team.net>
Date: Tuesday, March 30, 1999 8:53 AM
Subject: Steering wheel removal
>Do I need to use a puller to remove my steering wheel or do I just remove
>the center nut a wiggle it off? The service manual makes no mention of
using
>a puller and the three holes in hub (120 degrees apart) do not appear to be
>threaded.
>Scott Donnelly
>SV
>
>
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:41:08 CDT