Re: Rounded bolt heads

From: Bob Hamilton (hamilton(at)cast.navnet.net)
Date: Wed Apr 07 1999 - 21:14:07 CDT


Group,

        If all else fails and you are in a tight spot, there is always the feared
Dremel Tool with the thin cut-off disc!

Later,
Bob

At 07:50 PM 4/7/99 -0500, Paul Almjeld wrote:
>Jarrid and Tom:
>
>Either the vise grips or a small pipe wrench will usually do the trick -
>from one who, unfortunately, has had a bit of experience with rounded heads.
>
>Paul from sunny South Dakota
>
>T Wiencek wrote:
>
>> RE>>Rounded bolt heads 4/7/99
>>
>> Just use a small pipe wrench.
>>
>> --------------------------------------
>> Date: 4/7/99 12:42 PM
>> To: T Wiencek
>> From: Louie & Laila
>> I'd take off the radiator, find a black nut with good sides that fits over
>> the top and weld it to the rounded portion. Let it cool (shrink) and run it
>> out. Lou
>>
>> >Fellow piners - continuing the tear-down of my Series 3, I have stupidly
>> >rounded one of the bolts on my radiator fan. Any suggestions on how to get
>> >this off?
>> >
>> >As always, thanks for any information you can pass my way.
>> >Scott Christie
>> > Series 3 Alpine Registry
>> >
>>
>> ------------------ RFC822 Header Follows ------------------
>> Received: by qmreceive.anl.gov with ADMIN;7 Apr 1999 12:40:45 -0500
>> Received: from triumph.cs.utah.edu (triumph.cs.utah.edu [155.99.188.52])
>by dns2.anl.gov (8.9.1a/8.6.11) with ESMTP id MAA18032 for
><wiencek(at)anl.gov>; Wed, 7 Apr 1999 12:41:55 -0500 (CDT)
>> Received: from localhost (daemon(at)localhost)
>> by triumph.cs.utah.edu (8.9.1/8.9.1) with SMTP id LAA18208;
>> Wed, 7 Apr 1999 11:40:59 -0600 (MDT)
>> Received: (from majordom(at)localhost)
>> by triumph.cs.utah.edu (8.9.1/8.9.1) id LAA18154
>> for alpines-actors; Wed, 7 Apr 1999 11:40:36 -0600 (MDT)
>> Message-ID: <001401be811c$82379260$4f0536d1(at)bwana>
>> From: "Louie & Laila" <bwana(at)c2i2.com>
>> To: "Christie, Scott E. (CAP, GEFA)" <Scott.Christie(at)gecapital.com>,
>> "'Alpine Subscribers'" <alpines(at)autox.team.net>
>> Subject: Re: Rounded bolt heads
>> Date: Wed, 7 Apr 1999 10:29:23 -0700
>> MIME-Version: 1.0
>> charset="iso-8859-1"
>> X-Priority: 3
>> X-MSMail-Priority: Normal
>> X-Mailer: Microsoft Outlook Express 4.72.3110.1
>> X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3
>> Sender: owner-alpines(at)autox.team.net
>> Precedence: bulk
>> Reply-To: "Louie & Laila" <bwana(at)c2i2.com>
>

=========================================================
Robert (Bob) A.C. Hamilton, Waverley, Nova Scotia, Canada
The Man of Many Sunbeams - Alpine, Drophead and Saloon 1953-1954
Home Page: http://www.navnet.net/~hamilton/index.html
E-Mail: hamilton(at)cast.navnet.net
=========================================================



This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:44:37 CDT