>I could use a little knowledge booster. Paul needs a sway bar. I have a
>couple. I have no idea if these swaybars will fit Pauls series 3. I
>don't want to ship him the wrong part. Any ideas?
Unless you have a reference piece to compare to, it will be tough to
determine what series that the bar belongs to by sight.
Series IV and V seem to have the same bar, unless a larger bar
has been fitted.
Stock is 5/8 inch. Tigers used 3/4, and replacements are available
to 1 1/8 inch.
Series I to III have a slightly different bar, which clears the
crossmember weld lip. Later cars dont have the weld lip on the
crossmember, so these bars dont protrude quite as far foreward.
There is also some minor differences in the angles that the bar
ends are bent to, which in the case of larger bars wont be able
to be mounted even with the interferance.
Hope this helps.
Jarrid
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:45:14 CDT