Thanks for looking into all this for me Bob. So just to make sure that this
is making it through my cold medicine fogged brain...I can put a Series III
cam in? If so, that is great. I had visions of the incredible amount of work
involved in swapping the oil gear to a Series V.
Now If I could just find the Commer mailing list.......
Again thank you for tracking down all of this info.
Kurt
> -----Original Message-----
> From: owner-alpines(at)autox.team.net
> [mailto:owner-alpines(at)autox.team.net]On Behalf Of herbeam
> Sent: Friday, May 28, 1999 7:33 PM
> To: Alpines AutoX Team
> Subject: Kurts Cam problem
>
>
> Just got done talking to Smitty about the cam problem and he says
> the casti
> iron head engine had the same firing order but the valves were
> in opposite
> places on the 2/3 cylinders. So the cam has to come out. Smitty says to
> remove it through the grill without disturbing the rest of the engine. Any
> aluminum head series I-IV cam will work with the current configuration.
>
> On the light side:
>
> Advertise the full race Piper hot road grind and you'll make somebody's
> day......a Commer that will really commmmmmm !!!!
>
>
>
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:49:12 CDT