Rob,
>
> After an enjoyable 2 hour Sunday drive yesterday and a 2 hour
>cooling down period in the garage my Alpine will not start. I put an
>inductive timing light on the coil wire and all four spark plug wires
>and I show no spark in the first and second plug wires ( closest to
>radiator). The wires test around 7000 ohms, I changed the distributor
>cap and I cannot get the # 1 plug to arc while grounding. The plug shows
>about 4000 ohms resistance ( I think)That's as far as I've gotten. Any
>suggestions on where to proceed when I get home tonight?
>
>Rob Nanzig
>67SV
If it sparks on some, but not others, check your points gaps.
At the edge of function, the difference in machining and wear on the
cams, can make some cyls fire and others not.
Just a thought.
Good luck,
Jarrid
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:51:44 CDT