Re: Series 3 heater parts

From: Paul Heuer (paul.heuer(at)dsto.defence.gov.au)
Date: Thu Jun 17 1999 - 18:36:33 CDT


Christopher.Albers(at)bubbs.biola.edu (Christopher Albers) writes:
> The part is actually a drain tray that connects to a duckbill drain in
> the trans tunnel via a hose. These are not currently reproduced and
> they can be very hard to find used as they tend to dry out and crack
> due to the heat of the heater core. I happened to find mine at
> Smitty's. It was the only uncracked one he had.

Chris,
Thanks for the info on the drain trough, even if it is bad news :-(

I'm surprised that no-one makes a repro given it was used on S3- S5s,
and tends to perish.

Is there any interest among listers in having some made up?

Cheers,
Paul.

--



This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:52:22 CDT