Alpdavegre(at)aol.com wrote:
> Steve,
>
> I think Rick at Sunbeam specialties has new ones of these. Check it out. I
> had a simular problem and found through a friend that the spring that snaps
> the trunk lock had one half of it broken so there was not enough tension on
> the lock pawl. Once I replaced the unit with a used one it worked super and
> it has never popped open again. Worth checking it out.
> Dave Green.
Dave:I ordered the part from Rick earlier today. When it gets here I'm going to
take the bottom part of the lock out anyway as the "tumbler" spins, so I need
to open things up to find out why. I'll check the spring at the same time.
Thanks for the tip.
Steve Sage
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:59:44 CDT