Re: Starter woes

From: chuck nicodemus (armorseal(at)iccom.com)
Date: Wed Aug 04 1999 - 11:12:54 CDT

Next message: chuck nicodemus: "Re: Keeping Hands Clean(-ish) [was: Re: New Alpine Owner]latexgloves"
Previous message: Thomas Wiencek: "Cam Specifications"
In reply to: Chris.S.Mottram(at)ecc.com: "Starter woes"
Next in thread: Ron Tebo: "Re: Starter woes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Get a new.or rebuild the unit.
I have found if you take it apart and clean the hek out of it they work for
quite a while
my2p
chuck

Chris.S.Mottram(at)ecc.com wrote:

> Apparently I have a dead spot on my starter. Sometimes I turn the key and
> "click", then I have to turn the starter with a wrench a little and it
> works. How do I fix this or should I just get a new one?
>
> Chris

Next message: chuck nicodemus: "Re: Keeping Hands Clean(-ish) [was: Re: New Alpine Owner]latexgloves"
Previous message: Thomas Wiencek: "Cam Specifications"
In reply to: Chris.S.Mottram(at)ecc.com: "Starter woes"
Next in thread: Ron Tebo: "Re: Starter woes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 10:59:48 CDT