You wrote
>
>According to my parts manual, there are three slave cylinder
push-rods:
>the series I (adjustable), the series II-III (up to
B9204717)#1206903,
>and the series III-V (from B9204718)#1203637. If no one has
managed to
>identify which is which, any one who has a series V spare
shouldbe able
>to measure and identify.
>
>Also, I know someone who has a new (still in the box) series II
pressure
>plate (9 spring)
>(which would fit any flywheel if the pins are relocated, but is
series
>II ). Let me know if you need this.
>Hope this helps!
>
>Ron Tebo
Hi Ron,
I am putting on a 9 spring pressure plate that appears to be in
good shape. You can't use the later flywheel unless you get it
drilled and tapped for the bigger clutch. I decided to revert back
to the earlier flywheel.
My assumption is that the longer rod ( 41/4") is the one to use as
it compensates for the fulcrum housing being shorter in height.
But, I would like some confirmation... please guys!!
Tony ...
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 11:00:41 CDT