When towing, I would not recommend placing the car in gear since some rocking
motion is apt to put stress on the box.
chuck nicodemus wrote:
> Scott Donnelly wrote:
>
> > Com'on Alpine owners... How about a reply to my low tech question. Thx.!
> >
> > SD
> >
> > I am about to have my SV Alpine flat bedded to the paint shop (I would
> > >drive it except the lights, windshield and interior are removed) and
> > >need to know the best location to hook up the tow cable/strap. My
> > >thought was to run a strap around the front cross member and winch it
> > up
> > >front end first. Any advice appreciated.
>
> Scott ,I just flat bedded my seriesll from Seattle to Portland. I just ran a
> chain up over the A frame in front and CAUTION in the back one chain arond
> the axle. It does't take much to hold it in place but make sure the wheels
> are blocked and the IN gear and brake on. It'll travel just great
> my 4.275 p
> chuck
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 11:00:45 CDT