dirty_howi(at)yahoo.com writes:
>the only other begging question is if a no lead head is available for
>it, i
>think one or more valves are toast and need to be replaced, can
>hardened seats
>be put into the current head and made to work or should i replace the
>head with
>a no lead variety.
You can (and should) replace either the seats or the valves with
hardened steel. You don't need to do both. Putting in hardened seats
would probably be cheapest.
CNA
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 08:35:36 CDT