My series ll has screws to hold the hub on /keep them from vibrating? Still
wre after removeing the screws a bugger to get off. slight heat 150-250 in the
centre area three inch circle and one fell off easy the other had to be
reminded that the hammer and steady pressure were bigger that it was.
good luck
chuck
david_kelly(at)ici.com wrote:
> Jay
>
> I had a similar problem in removing the drums on my series II. It looked
> like they hadn't been off in many years and the previous owner had damaged
> them taking what look like bites out the edge.
>
> I couldn't get them so even when the brake adjuster was fully backed off.
>
> In the end I found the drum around the centre had become one with the hub.
> A quick 'tap' with a large screw driver and hammer around the join broke
> the seal and the drum came away easily.
>
> When I got them off one of the slave cylinders had leaked badly and the
> shoes had perished.
>
> Dave Kelly
>
> IMPORTANT NOTICE:
> This email is confidential, may be legally privileged, and is for the
> intended recipient only. Access, disclosure, copying, distribution, or
> reliance on any of it by anyone else is prohibited and may be a criminal
> offence. Please delete if obtained in error and email confirmation to the
> sender.
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 08:36:02 CDT