Julian Cranwell wrote:
> Take heart, it's not as difficult as it sounds. The dummy lay-shaft is the
> key. You can make this out of tubing of the right diameter, either metal or
> plastic plumbing piping works. Once you get it aligned, it's a simpel
> matter of pushing out the dummy shaft with the lay-shaft.
>
> While you have the box out, I'd recommend taking a good look at the state
> of the bronze synchromesh rings, and replacing where needed, particularly
> for 1st/2nd.
I have printed all of this good advice and will tackle the job at hand ...right
after a 2 week hoilday.
Thanks to all
cheers
chuck
and to all those Veterans ,, Thanks
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 08:41:09 CDT