GSTROM99(at)aol.com wrote:
> On a Series II motor, where is the timing mark? Both of my books (Rootes and
> Haynes) say it's on the right side (about 11 o'clock?)
If you are at the front looking back its' on your left ...Don't forget all
directions are normally given from the driver facing forward.
> . Can't find mine...
> What is the marker?
My marker wasn't as supposed. I finnally VERY carfully """ while the engine was
idleing ran down a dowling and pressed soft at first then harder untill all the
gunk was off of the main pully. the tad I found was very small and after working
with a timing light it all was there .
Just clean and it will be. Then I sprayed white paint very little on the pully at
the maeks and then reused the stick to clean off the excess. Walla a marked pully
and a tab I could see.
> Is it really that small little tab, spot welded to the
> cover? Maybe mine fell off.
This could be. Clean the area very well (you may have to remove the radiator)
uck... To fine the area where the tab was.
My 2.785 p
chuck
Series ll
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 08:47:43 CDT