Re: rear end ratios

From: robert nanzig (rnanzig(at)webtv.net)
Date: Wed Feb 16 2000 - 09:02:54 CST

Next message: Jay Laifman: "Re: plastic in door panels"
Previous message: Brent Kasl: "Pos-Neg Ground"
Next in thread: Russ Eshelman: "Re: rear end ratios"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Steve, You can determine the ration by jacking up the car and turning
the tire one revolution. The drive shaft will turn either 4.22 turns or
3.89 turns.Put a mark on the shaft so you can count each time it comes
around. If both wheels are off the ground the drive shaft will turn half
those numbers.

Rob Nanzig
67SV

Next message: Jay Laifman: "Re: plastic in door panels"
Previous message: Brent Kasl: "Pos-Neg Ground"
Next in thread: Russ Eshelman: "Re: rear end ratios"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 08:49:49 CDT