yeah, its just a giant 80hp automatic one
greg
----- Original Message -----
From: Jarrid Gross <JGross(at)econolite.com>
To: Greg Locke <glocke(at)ihug.co.nz>; brian steel <brian_steel(at)telus.net>
Cc: Alpine list <alpines(at)autox.team.net>
Sent: Tuesday, 7 March 2000 12:41
Subject: RE: timing cover removal
> Two words:
>
> Impact wrench.
>
> Jarrid Gross
>
> >Hi brian,
> >
> >If you need to get real drastic, I once removed a stubborn front bolt by
> >putting a good fitting socket wrench with a pipe on the handle on it and
> >rotating the engine clockwise till the handle was just about to hit the
> main
> >front crossmember. Then with the coil disconnected, giving the engine a
> >flick on the starter motor.
> >
> >If any other listers have some serious doubts as to the soundness of this
> >method. please intervene, but it did work for me.
> >
> >Greg
>
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 08:52:26 CDT