mbgardner wrote:
> Has anyone switched the seat back reclining handle from one side to the
> other? Can it be done with a reasonable degree of certainty? My original
> passenger side seat frame cracked and I have been using a second driver's
> seat I had . The problem is that it leaves the handle in a vulnerable
> position when used on the passenger side. My choices are to fix the old
> p-side seat or switch the handle/release mechanism. The seats otherwise
> look identical except the handles are on the inside
Been there. Done that. I switched both my seats around, so that the handles
were both in the middle (the drivers seat was wearing faster than the
passenger seat). The only problem is if you have a centre console. My
console is not secured, so we just push it off to one side if it is in the
way, then move it back.
Terry McKitrick
Series I
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 08:52:50 CDT