Brent wrote,
>Any OD owners know the approximate ohm reading for the lockout switch on
>the OD unit? Maybe it does not matter as long as their is a reading but
>before this is installed I am checking everything. Thanks Brent
When closed or in the 3rd 4th position, the resistance should be less
than .1 ohm. This switch does pass the OD relay current, so it does need
to be a low resistance.
When opened, it should be infinate (at least 1 megohm).
Jarrid Gross
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 08:56:57 CDT