James Downing wrote,
>The lifter had a small chip in the outside top
>edge. No debris to be found though. (I thought some metal might have
>gotten down in the lifter cup and prevented the pushrod from coming down
>all the way). While in there, I decided to check the rest of the lifters.
>AACKKKK! they all have the little chip! This can't be normal. Is it
>serious? Should I replace them?
You must have bought your lifters at victoria british.
I have seen many from VB look like this, I think it was part of the
manufacturing process.
Yours have allready broken in (presumably), Id they were new, Id
stone the edges, and use them anyhow, as I have doen before.
Jarrid Gross
This archive was generated by hypermail 2b30 : Tue Sep 05 2000 - 08:59:20 CDT