You could also coat them with Jet Hot or other ceramic type coatings. They
are also supposed to reduce heat and they will look attractive.
-----Original Message-----
From: Christopher.Albers(at)bubbs.biola.edu
[mailto:Christopher.Albers(at)bubbs.biola.edu]
Sent: Wednesday, September 20, 2000 2:11 PM
To: JGross(at)econolite.com
Cc: Jay_Laifman(at)countrywide.com; alpines(at)autox.team.net
Subject: Re: RE: Alternator shop and Alt number
JGross(at)econolite.com writes:
>Have you considered that possibly the heat of the nearby header tubes
>might be causing electronic drift of the regulator?
>I doubt that the hitach alternator was designed to have such a hot
>component so near by.
For what it's worth, I wrapped my stainless steel headers in the
asbestos-like header tape. There is a significant decrease in heat
around the carbs and the alternator as a result. Those headers very
nearly wrap around the alt, so high heat could likely be a problem.
CNA
This archive was generated by hypermail 2b30 : Mon Oct 02 2000 - 08:20:34 CDT