Isn't there a great write up about this at 311s.org. That is what I used 3
years ago for my seats, yes awesome. Roll bar considerations aside (I don't
want to bring up the roll/show bar discussion from 2 years ago again) the
seats fit in well with a stocker roll/show bar. Yes my head will break like a
melon with the seat/bar combo if I flip, but that is the chance all roadster
owners take unless you have a full cage.
I used the pins on the seat rails to 'locate' the seats, in the stock holes,
and bent the seat rails up with a healthy sized crescent wrench shoved into
the rail holes. What a fun job, maybe the most rewarding for the time of all
the work that I have done to the roadster. Your back will thank you.
Eric G
Modesto, CA
|