datsun-roadsters
[Top] [All Lists]

Re: [Roadsters] Bent center link - what metal to fabricate a

To: <datsun-roadsters@autox.team.net>
Subject: Re: [Roadsters] Bent center link - what metal to fabricate a
From: "Andy Cost" <andycost@embarqmail.com>
Date: Sat, 27 Oct 2007 17:16:47 -0500
--===============0834976802==
Content-Type: text/plain; charset="windows-1250"
Content-Transfer-Encoding: 7bit

The important part is that both ends are the same height.  If one is lower
then you will have some nasty stuff going on with the handling.  If both
ends are the same height then the center link could be pretzel shaped and
still work fine.

Andy

--===============0834976802==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

________________________________________


Datsun-roadsters mailing list

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/datsun-roadsters

--===============0834976802==--

<Prev in Thread] Current Thread [Next in Thread>