has anyone converted to discs all around?
kiwi
On 28 October 2010 10:29, Brian Hollands <bhollan4@tampabay.rr.com> wrote:
> I think all the 1600 and 2000 drums are the same but the aluminum drums
> specs are 9.00 inch inside diameter with a maximum ID of 9.040 and a wear
> limit of 9.055 inches.
> I've found that at 9.040, it can be difficult to get a firm pedal no matter
> how much you bleed the system. Either way, the rear shoes need to be
> properly adjusted or you'll be chasing a soft pedal.
> Once my drums got a bit further out of spec than I was happy with, I had a
> set of shoes relined with a thicker friction material. A truck brake shop
> did it for me. In case there's concern with that tactic, I've autocrossed
> for several seasons on those shoes...
> Brian H
> '69 2000
> Tampa, FL
>
> -----Original Message-----
>
> Does anyone have the min-max specs for the drums and rotors on the 67
> Roadster? Are they in print? I didn't see them in the manuals on 311SPL.org
> ________________________________________
> Datsun-roadsters@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $16.00
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage <http://www.team.net/forums%0AUnsubscribe/Manage>:
> http://autox.team.net/mailman/options/datsun-roadsters/antonywardle@gmail.com
________________________________________
Datsun-roadsters@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $16.00
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|