fot
[Top] [All Lists]

Re: TR4 #197...Looking for rev limiter & front anti-swaybar

To: jaboruch <jaboruch@netzero.net>
Subject: Re: TR4 #197...Looking for rev limiter & front anti-swaybar
From: Ted Schumacher <tedtsimx@q1.net>
Date: Tue, 31 Oct 2000 14:15:05 -0500
joe(b), fyi you might want to check the sway bar rate chart on our web
page. ted

jaboruch wrote:

> Joe, I am using a 1 inch bar up front that someone had made about 30
> years ago.  It mounts in aluminum blocks that bolt to the front ends
> of the frame.  There are brackets that attach to the underside of the
> lower A arms and rod ends that connect it all together.  I still have
> hanging around a 1 inch bar that I had on another TR3 but I would have
> to check to see if it would be wide enough for a TR4.  I had it
> mounted to brackets that attached to the frame where the bumper
> brackets attached.  Rather than bending a bar, I used straight bar and
> fabricated arms that clamp and are welded to the ends of the bar.
>  Joe(B)
> ----- Original Message -----
> From: <N197TR4@cs.com>
> To: <fot@autox.team.net>
> Sent: Sunday, October 29, 2000 3:41 PM
> Subject: TR4 #197...Looking for rev limiter & front anti-swaybar
>
> > With new 'cheatin dog' engine...(designed to close the gap on the
> burgeoning
> > and swift MGB crowd...or Bob Kramer's TR4), I suspect it is prudent
> for me to
> > have rev limiter on engine that features stock rotating Stanpart
> pieces with
> > upgraded cam.
> >
> > In order to go faster around corners, I am looking for something
> that is
> > thicker than the 3/4" Addco....and that is wider without
> interference to the
> > cramp angle.
> >
> > Anyone have either of these items lanquishing on the shelf as excess
> > inventory?
> >
> > Or in the absence of fot inventory, how about recommendations?
> >
> > Thanks...I think I see the start of another thread that may benefit
> some
> > folks.
> >
> > Joe (A)
> >
> >
> >
>
> ____________NetZero Free Internet Access and Email_________
> Download Now     http://www.netzero.net/download/index.html
> Request a CDROM  1-800-333-3633
> ___________________________________________________________

--
Ted Schumacher
tedtsimx@q1.net
http://www.tsimportedautomotive.com
Fax: 419/ 384-3272 (24 hrs.)
Phone: 800/ 543-6648 (US & Canada)
Tech/Gen Info/Worldwide: 419/ 384-3022

******************************************************
New - used - rebuilt - performance British car parts.
200-300 cars in our British salvage yard.



<Prev in Thread] Current Thread [Next in Thread>