[Top] [All Lists]

RE: GT6 Wheel studs

To: "Joe Curry" <>, <>
Subject: RE: GT6 Wheel studs
From: "Bill Bartlett" <>
Date: Tue, 25 Feb 2003 14:52:35 -0500
I just checked with Dave Bean and they said that they can install the 7/16 - 20 
either 1" long or protruding 2.3 ". So it looks like the 7/16 is ok I just need 
to figure on which stud length.
Bill B

-----Original Message-----
From: Joe Curry []
Sent: Tuesday, February 25, 2003 2:43 PM
Cc: Bill Bartlett;
Subject: Re: GT6 Wheel studs wrote:
> Bill,
> The alloy hubs will likely be drilled for the stock 3/8" studs so you'll have
> to bore them to take whatever studs you're using.  The 7/16-20 upgrade is
> most likely a Chevy size.  If not, look to use them as you can get a
> replacement stud at any tire store.  I recommend the ARP studs but that's up
> to you.
> Steve

Steve (and all)
The stock hubs take the larger studs without modification so I don't
know why the alloy ones would need to be modified.  The smaller studs
have a shank that is the same size as the TR6 studs.  So it should not
be necessary to re-size them.

Joe (C)

<Prev in Thread] Current Thread [Next in Thread>