fot
[Top] [All Lists]

RE: [FOT] Rear Spring and Shackle Bushing Kit

To: "'Mark York'" <m-syork@comcast.net>, N197TR4@cs.com,
Subject: RE: [FOT] Rear Spring and Shackle Bushing Kit
From: Bill Babcock <BillB@bnj.com>
Date: Tue, 4 Jul 2006 13:12:24 -0700
What!! Aren't you coming down for the Portland Historics?  

> -----Original Message-----
> From: owner-fot@autox.team.net 
> [mailto:owner-fot@autox.team.net] On Behalf Of Mark York
> Sent: Tuesday, July 04, 2006 9:59 AM
> To: N197TR4@cs.com; fot@autox.team.net
> Subject: RE: [FOT] Rear Spring and Shackle Bushing Kit
> 
> Full-Commercial Message:
> I installed the kit last week along with some bronze bushings 
> I had made for the front spring eye; it's quick and easy to 
> install. It's probably nothing like adding a panhard rod but 
> I think this is a poor (or lazy) mans option to tighten 
> things up a bit at the rear. I'll be testing it at the SCCA 
> Vintage grid at Bremerton Raceway in 3 weeks.
> Mark
> 
>  
> -----Original Message-----
> From: owner-fot@autox.team.net 
> [mailto:owner-fot@autox.team.net] On Behalf Of N197TR4@cs.com
> Sent: Saturday, July 01, 2006 11:13 AM
> To: fot@autox.team.net
> Subject: [FOT] Rear Spring and Shackle Bushing Kit
> 
> Semi-Commercial Message:
> 
> Fifteen years ago, I came up with bushing kit made of brass. 
> In building my TR project, I put together another kit with 
> some improvements.
> 
> I sent one to Mark York for his use, and now wonder if others 
> might be interested. If you guys are interested, I might go 
> to the street guys next.
> 
> I have a picture of the kit, if you want to see it.
> 
> I can produce and assemble the kit in volume for about $30 
> per kit.  It would take about 25 kits to make it worthwhile 
> to go through the exercise, once, but I would do it and 
> perhaps be ready to ship by September.
> 
> Whaddya think?
> 
> Joe (A)
> 
> 
> ===  Help keep Team.Net on the air
> ===     http://www.team.net/donate.html
> 
> 
> ===  Help keep Team.Net on the air
> ===     http://www.team.net/donate.html



<Prev in Thread] Current Thread [Next in Thread>