Do I ultimately want the fan housing to even touch the radiator or
should it be mounted (on a special mount) back from the surface of the
radiator face by an 1/8 to 1/4 inch? Do you have any photos of the
shroud you made? Jim
-----Original Message-----
From: Joe Curry [mailto:spitlist@cox.net]
Sent: Sunday, June 29, 2008 1:55 PM
To: 'jim hearn'; 'Friends of Triumph'
Subject: RE: [Fot] Trying to mount an electric fan on a high density
radiator
I built an aluminum shroud that attached to the radiator frame. The fan
attached to the shroud. Worked great
Joe C.
-----Original Message-----
From: fot-bounces+spitlist=cox.net@autox.team.net
[mailto:fot-bounces+spitlist=cox.net@autox.team.net] On Behalf Of jim
hearn
Sent: Sunday, June 29, 2008 1:48 PM
To: 'Friends of Triumph'
Subject: [Fot] Trying to mount an electric fan on a high density
radiator
I am trying to mount an electric pusher fan in lieu of the belt driven
fan
to gain the hp. The radiator in my '74 TR6 ex-SCCA racer is the high
density type so I am not able to mount with ties the usual way through
the
radiator. Does anyone have any ideas as to a good way to mount the
aftermarket fan? Thanks for any ideas. Jim
[demime 1.01d removed an attachment of type application/ms-tnef which
had a
name of winmail.dat]
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
You are subscribed as spitlist@cox.net
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|