fot
[Top] [All Lists]

Re: [Fot] ... + racing Triumph-related question

To: <JWoesvra@aol.com>, <brad.kahler@141.com>, <fot@autox.team.net>
Subject: Re: [Fot] ... + racing Triumph-related question
From: "RACER BUD" <budscars@comcast.net>
Date: Sat, 25 Oct 2008 13:26:07 -0700
what shoes/soles do you have?
Racer Bud
----- Original Message ----- 
From: <JWoesvra@aol.com>
To: <brad.kahler@141.com>; <fot@autox.team.net>
Sent: Saturday, October 25, 2008 1:23 PM
Subject: Re: [Fot] ... + racing Triumph-related question


>a  message dated 10/25/2008 4:08:45 P.M. Eastern Daylight Time,
> brad.kahler@141.com  writes:
>
>
> Is the slippage that is being described, between the shoe and the
>>> floor or
>>> with the pedals?  I would think that  the Pedals are the main concern.
>>>
>>> If that is the case,  putting some sort of abrasive surface on the 
>>> pedals
>>> might be the  solution.
>
> The best way to solve this in my experience is to remove the pedals and
> drill 1/4" holes through from the backside. Works best with a drill press. 
> You
> can get about 10-15 holes in most British pedals.
>
> When you turn the pedal right-side up, the holes will have sharp burrs 
> that
> give great grip. Resist the temptation to smooth them off.
>
> This will last for years and totally resists oil and other slippery
> substances.
>
>
> Jack Woehrle
>
>
>
>
> **************A Good Credit Score is 700 or Above. See yours in just 2 
> easy
> steps!
> 
>(http://pr.atwola.com/promoclk/100000075x1211625659x1200715650/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=82&bcd=emailf
> ooter)
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html

http://www.fot-racing.com

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>