On 8/5/2010 9:47 PM, Joe Boruch wrote:
> I was not aware that Cometic had one for the TR4, this is great news! Their
>web site only shows it as 88mm. Anyone know if this has the relief to match
>grinding the top of the cylinder liner for intake valve flow? Joe(B)
>
They'll make a gasket for whatever bore you request. I have 89mm
sleeves, so they made an 89mm gasket, same price as a stock gasket,
IIRC. The gasket does not have the relief tho.
jim
--
Jim Hassall
Blacksburg VA
'63 TR4 in autox preparation
99% finished, 90% to go
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|