fot
[Top] [All Lists]

Re: [Fot] Cometic TR3 head gasket

To: "'J.C. Hassall'" <jhassall@blacksburg.net>, "'Joe Boruch'"
Subject: Re: [Fot] Cometic TR3 head gasket
From: "MadMarx" <tr4racing@googlemail.com>
Date: Fri, 6 Aug 2010 14:00:47 +0200
What material is the gasket made from?

Chris

-----Urspr|ngliche Nachricht-----
Von: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] Im
Auftrag von J.C. Hassall
Gesendet: Freitag, 6. August 2010 13:34
An: Joe Boruch
Cc: fot@autox.team.net
Betreff: Re: [Fot] Cometic TR3 head gasket

On 8/5/2010 9:47 PM, Joe Boruch wrote:
> I was not aware that Cometic had one for the TR4, this is great news!
Their web site only shows it as 88mm.  Anyone know if this has the relief to
match grinding the top of the cylinder liner for intake valve flow?   Joe(B)
>
They'll make a gasket for whatever bore you request.  I have 89mm
sleeves, so they made an 89mm gasket, same price as a stock gasket,
IIRC.  The gasket does not have the relief tho.

jim

--
Jim Hassall
Blacksburg VA
'63 TR4 in autox preparation
99% finished, 90% to go
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/tr4racing@googlemail.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>