Bill
I have a 3 qt accusump mounted on the tunnel next to the seat. Easy
reach for the ball valve and the 10 AN hose that runs to a T in between the
remote oil filter and cooler and the filter bypass plate. I also use a
check valve in the circuit.
I considered running the line directly to the oil gallery (plugs on the
side of the engine) but had hardware issues.
My installation is on a 1.3L Spitfire.
Good Luck
Glenn
On 9/4/2010 8:48 AM, WILLIAM TOBIN wrote:
> Hi Gang, I'm thinking about installing an Accusump, or Moroso's version of
> it.
> Any advice on the installation, and where is the best place(s) to plumb it
> into the engine?
> Thanks, Bill
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/gaf3@charter.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|