It's interesting how many ways there are to skin a cat. Here's my
version [engine in car]:
Get your 6pt socket and breaker bar, wedge it against the floor or
frame rail and bump the starter - done!
Greg "Lunker" Hilyer
TR4 #314
Albuquerque NM
On Jan 7, 2012, at 4:31 PM, Randall wrote:
>> Does the hand crank fixture on the end of the holder
>> have threads?
>
> Yes. It's a great big bolt that reaches through the center of the fan
> extension and threads into the nose of the crankshaft. You'll
> likely need a
> 6-point socket to grab the head (due to the rounded corners).
>
>> If
>> so how can you get it off?
>
> Impact wrench works a treat, if you have one. Otherwise you'll
> need some
> way to hold the crank from turning, like maybe a big screwdriver
> stuck in
> the flywheel teeth.
>
> -- Randall
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/
> lunkercars@earthlink.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|