fot
[Top] [All Lists]

Re: [Fot] Racing a TR3 A Type Overdrive

To: Catpusher@aol.com, fot@autox.team.net
Subject: Re: [Fot] Racing a TR3 A Type Overdrive
From: steve <colordog.1@earthlink.net>
Date: Tue, 13 Nov 2012 13:21:41 -0500 (EST)
Cc: HRPTR3@aol.com
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=dk20050327; d=earthlink.net; b=CoQrI6AkLAIQyF2Fg6QkdZFbinKkwLojJaLyVPE7hesX67GwQQbxVQ1zGGrQvUho; h=Message-ID:Date:From:Reply-To:To:Subject:Cc:Mime-Version:Content-Type:Content-Transfer-Encoding:X-Mailer:X-ELNK-Trace:X-Originating-IP;
Hardy, I found your detailed OD info very illuminating.  No, I don't even run 
an OD unit in my TR3 but I enjoyed your write-up nonetheless.  I can see that 
you've put a huge amount of time and effort into pushing your machine to it's 
uppermost limits of power and reliability.  Very cool!

~Steve


-----Original Message-----
>From: Catpusher@aol.com
>Sent: Nov 12, 2012 4:28 PM
>To: fot@autox.team.net
>Cc: HRPTR3@aol.com
>Subject: [Fot] Racing a TR3 A Type Overdrive
>
>Racing a TR3 A Type Overdrive  
>Please see what you can find in the archives. 
>For many years the TR3 was one of a very few cars  not allowed alternate 
>gearbox ratios in SCCA E Production. Using second gear  overdrive was 
>essential with a full race motor to bridge the gap between  2nd and 3rd. I 
>spent 
>thousands of hours studying and  modifying the OD. Running a pressure gauge 
>during events is necessary, as is not  allowing it to leak on the driver. The 
>gauge will show when the solenoid is out  of adjustment, and most critically, 
>when there is a running pressure drop. If  the accumulator piston does not 
>reach the blow off holes, that oil no longer  gets to several parts. The 
>specks for the accumulator bore are very tight, and  honing to remove the 
>steel 
>piston ring scratches will only work a few times. The  TR4A IRS/TR6 piston, 
>sleeve, and spring provide a much lower volume and  pressure, but a 
>replaceable sleeve is a good idea. Much research about piston  displacement 
>and 
>pressure pointed me towards a Jaguar sedan assembly that was  NLS, but JRT, 
>with the help of a UK Jaguar club, provided a few sets of piston  and sleeves, 
>and I also located the matching springs. I did find it necessary to  run an 
>oil cooling system with an electric pump and MGC auto gearbox cooler, all  
>set low enough that it would not flow back into the gearbox during the early  
>laps before the pump was turned on. Keep in mind that I was running slicks 
>and  often ran where the track temps were high. 
>TR Regards, Hardy
>_______________________________________________
>fot@autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe: http://autox.team.net/mailman/options/fot/colordog.1@earthlink.net
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/fot/mharc@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>