fot
[Top] [All Lists]

[Healeys] Belleville washers in BN2 steering box

Subject: [Healeys] Belleville washers in BN2 steering box
From: eyera3000 at gmail.com (i erbs)
Date: Fri, 13 Jan 2017 11:27:11 -0800
References: <5c4d20a5-d2ec-b119-8b67-e3a3923683eb@comcast.net> <001501d26b8e$fc7f3990$f57dacb0$@hunterbane.com> <3bcd1b68-3f2d-077b-07a7-1501c1ea4f7d@comcast.net> <CAHZDnjp-7BTQYPp0yB3vg2FweQOwoJfu=nmLH2rXig2TapxN8Q@mail.gmail.com>
I wanted to buy a luggage rack from England, They wanted 248 BPS for the
rack and 125 BPS to ship. I told them to find a cheaper way to ship or I
would not buy the rack. They told me too bad that was what it cost to ship.
Other suppliers have been willing to find a cheaper way to ship when I
asked...
But no VAT applied :)

Ira Erbs
Portland,OR
      _______                                  _______
     (______ \____1959 BN4____/ _______)
         (_________________________)
          BT7 engine and disk brakes

A racing car is an animal with a thousand adjustments. Mario Andretti
Please excuse random auto corrects and misspelled words

On Fri, Jan 13, 2017 at 7:27 AM, Neil Anderson <neilandcustom at gmail.com>
wrote:

> Bob,
>
> FWIW, there would be no VAT on export orders from the UK, but shipping is
> getting really expensive.
>
> Neil Anderson
> BT7
>
> On Thu, Jan 12, 2017 at 11:04 AM, Bob Spidell <bspidell at comcast.net>
> wrote:
>
>> Well, I went ahead and ordered from Moss.  I did a cursory check of the
>> interwebs didn't turn up anything of those dimensions here:
>>
>> https://www.mcmaster.com/#standard-washers/=15uvd84
>>
>> and here:
>>
>> http://www.keybellevilles.com/bellevilles/sampleCatalog.php?
>> gclid=CMCHjPHOuNECFQGRfgodVAoFuA
>>
>> and others, and I need to get this car back together before I start
>> losing the little bits.   FWIW, SC Parts and AH Spares have them at a more
>> reasonable price--esp. with the current exchange rate--but with VAT and
>> shipping it's not a massive savings.
>>
>> My thanks to Olin, Bob and others who responded; if I come across these
>> in this size I'll make a note for future reference.  Now, at least, I know
>> what they're for and how to stack them.
>>
>> Bob
>>
>> On 1/10/2017 2:14 PM, Olin Brimberry wrote:
>>
>> Bob,
>>
>> I figured height of the spring was also important, so I put 2 together and 
>> measured the height with calipers
>> Height of 2 washers: 0.100 inches
>> Height of 1 washer: 0.050 inches
>> Thickness of washer: 0.025 inches
>> Checking the previous diameter dimensions with a caliper, I get:
>>
>> ID: 1.057 inches
>> OD: 1.5 inches
>>
>> I suspect that the ID is originally spec'd to be 1-1/16" but because of the 
>> slight "spring", the diameter is slightly less.  Good luck
>>
>> Olin K. Brimberry, PE
>> Principal Engineerobrimberry at hunterbane.com
>> Office - 919.803.4274 <(919)%20803-4274>
>> Mobile - 919.522.1608 <(919)%20522-1608>
>>
>> HunterBane Engineering, PLLC
>> PO Box 10314
>> Raleigh, NC 27605
>> 3306 Alamance Drive
>> Raleigh, NC 27609
>>
>>
>>
>> -----Original Message-----
>> From: Olin Brimberry [mailto:obrimberry at hunterbane.com <obrimberry at 
>> hunterbane.com>]
>> Sent: Tuesday, January 10, 2017 4:34 PM
>> To: 'Bob Spidell' <bspidell at comcast.net> <bspidell at comcast.net>; 
>> 'Healeys' <healeys at autox.team.net> <healeys at autox.team.net>
>> Subject: RE: [Healeys] Belleville washers in BN2 steering box
>>
>> I just pulled mine out of a steering box I am rebuilding, and yes there are 
>> 6 positioned as such: ()()() Where only the outer edges touch.  The 
>> dimensions are as follows:
>>
>> ID: 1-1/16
>> OD: 1-1/2
>> Pictures of the measurements are attached for verification purposes.
>>
>> The washers were loose on the shaft, but I think the closer tolerance is 
>> going to be on the OD side.
>>
>> Olin K. Brimberry, PE
>> Principal Engineerobrimberry at hunterbane.com
>> Office - 919.803.4274 <(919)%20803-4274>
>> Mobile - 919.522.1608 <(919)%20522-1608>
>>
>> HunterBane Engineering, PLLC
>> PO Box 10314
>> Raleigh, NC 27605
>> 3306 Alamance Drive
>> Raleigh, NC 27609
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage: http://autox.team.net/mailman/
>> options/healeys/neilandcustom at gmail.com
>>
>>
>>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/eyera3000 at gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170113/cd268e24/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>