My Tr3 had an aluminum flywheel when I got it (no idea what brand, or when it
was new) and I sourced the diaphragm the clutch and PP through TS Imports.
So far, no problems and the clutch works like a charm!
Rick McCurdy
Newburgh, NY
(See you at "the Cup"!)
Sent from my iPad
> On Mar 24, 2017, at 1:51 AM, Charly via Fot <fot at autox.team.net> wrote:
>
> I belive British Parts NW has them also.steel lightweight flywheels
> Charly Mitchel
> TR6 #44
>
> On Thu 23/03/17 8:49 PM , Tony Drews via Fot fot at autox.team.net sent:
>> Most folks seem to do a Fidanza aluminum flywheel. Joe had a set of
>> steel ones similar to what's sold by Cambridge made a while back,
>> weighs the same and doesn't have the tendency to come loose from the
>> crank like the alloy ones do. Looks like this but for a TR4:
>> http://www.cambridgemotorsport.com/partsxx/cm6953
>> I use a diaphragm pressure plate like you describe with a heavy duty
>> clutch disk.
>>
>> The annular hydraulic throwout bearing is cool, but if you have any
>> kind of failure you have to pull the tranny. For that reason I
>> converted from a very cool setup like that back to stock - so if the
>> slave cylinder went out I had half a chance of fixing it at the track.
>>
>> Regards, Tony Drews
>>
>> At 02:57 PM 3/23/2017, STEPHEN BOROWSKI via Fot wrote:
>>> Hello All,
>>> What do you recommend for a race flywheel,
>> Pressure Plate and Disk?>My existing is a lightened stock flywheel with a
>> diaphragm type >(Porsche) pressure plate.
>>>
>>> Also has anyone used the hydraulic throw out
>> bearing devise? Is it worth it?>
>>> Thanks,
>>> Steve
>>> FL TR4 racer
>>>
>>> _______________________________________________>fot at autox.
>> team.net>
>>> http://www.fot-racing.com>
>>> Donate: http://www.team.net/donate.html>Archive:
>>> http://www.team.net/archive>Forums:
> http://www.team.net/forums>Unsubscribe/Manage:
>>> http://autox.team.net/mailman/options/fot/tony at tonyd
>> rews.com
>>
>> _______________________________________________
>> fot at autox.
>> team.net
>> http://www.fot-racing.com
>> Donate: http://www.team.net/donate.htmlArchive:
>> http://www.team.net/archiveForums:
> http://www.team.net/forumsUnsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/ch
>> arly at mitchelplumbing.com
>>
>>
>>
>>
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/fmccjr at
> aol.com
>
>
|