fot
[Top] [All Lists]

[Fot] Clutches

Subject: [Fot] Clutches
From: joealexandervintage at gmail.com (Joe Alexander)
Date: Thu, 12 Jul 2018 16:58:27 -0500
References: <7DCD4154-4948-4C11-B1E1-E1F950B669E5@me.com> <CAMmo4o-a8YujkQmhaha8S8dRAeNip7Oi1eYLtLA3qx9iA8=+bg@mail.gmail.com> <1AB5F3F1-B87C-43B0-8CF7-9612E78C463F@me.com> <CAMmo4o9gFmAXZhg59st8wrLztOWM7+3AtKXWVkdg2zOFCNz1Fg@mail.gmail.com> <0496554C-A7C3-41B4-B9F4-EDB9A482376A@aol.com>
Sean has source of up rated clutches. 

Very happy with them.

I think he gave Mike Moore our spare. Mike likely can provide an impression. 
Maybe a picture.

Good price.

Joe Alexander
4505 Donald Dr
Cedar Falls, IA 50613
The-vintage-racer.com
Gasketinnovations.com
Cell:  319.464.4711

> On Jul 12, 2018, at 2:22 PM, Phil Gott via Fot <fot at autox.team.net> wrote:
> 
> I?ve recently dealt with California Clutch, aka Clutchnet. Very 
> knowledgeable. They made a custom clutch disc for me and uprated my stock TR6 
> pressure plate. Very responsive. 
> Californiaclutch.com
> ?+1 (626) 448-7432?
> Phil Gott
> TR4A
> 
> Sent from my iPhone
> 
>> On Jul 12, 2018, at 12:43 PM, Jason Sukey via Fot <fot at autox.team.net> 
>> wrote:
>> 
>> I purchased mine from Richard Good.  I don't have close ratios, so it's the 
>> standard TR6 spline.  I would guess he can get them in the other spline 
>> count also.
>> Jason
>> 
>>> On Thu, Jul 12, 2018, 12:38 PM Scott Janzen <sjanzen at me.com> wrote:
>>> I have not - where do I source?
>>> 
>>> On Jul 12, 2018, at 12:25 PM, Jason Sukey <jsukey at gmail.com> wrote:
>>> 
>>> Scott, 
>>> Have you tried the AP racing clutch disc (stock size)? Very smooth 
>>> engagement, claimed increase in torque capacity over stock disc.
>>> 
>>> Jason
>>> 
>>> 
>>>> On Thu, Jul 12, 2018, 12:13 PM Scott Janzen via Fot <fot at 
>>>> autox.team.net> wrote:
>>>> I?ve apparently reached beyond the limits of a stock pressure plate and a 
>>>> traditional/organic material clutch disc.  I was getting unacceptable 
>>>> clutch slip at the Kastner Cup initially on the 3-4 and then on the 2-3 
>>>> shifts, to the point I could not apply full power.  It?s not oil, just 
>>>> heat and power, as the clutch disc has only a few events on it.  I?ve got 
>>>> over 180 hp at the crankshaft.
>>>> 
>>>> What sources have you all found for uprated components?  I?m willing to 
>>>> change flywheels.  Should I consider a small diameter, solid 
>>>> center/multi-disc racing clutch?  With the close ratio gears and welded 
>>>> diff, I need to do a fair amount of clutch slip around the paddock, and am 
>>>> also concerned about how the on-off nature of one these might further 
>>>> stress the differential.
>>>> 
>>>> Scott Janzen
>>>> GT6
>>>> _______________________________________________
>>>> fot at autox.team.net
>>>> 
>>>> http://www.fot-racing.com
>>>> 
>>>> Donate: http://www.team.net/donate.html
>>>> Archive: http://www.team.net/pipermail/fot
>>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jsukey at 
>>>> gmail.com
>>>> 
>>>> 
>>> 
>> _______________________________________________
>> fot at autox.team.net
>> 
>> http://www.fot-racing.com
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/fot
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/vfracing at 
>> aol.com
>> 
>> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/fot
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/fot/joealexandervintage at gmail.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/fot/attachments/20180712/59a4e899/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>