Hi Phil;
Do you intend for the suspension to pivot on the bolts or will they just be
used to attach heim joints and the like?
Jim in Palmdale
----- Original Message -----
From: Phillip Landry <saltracer@netscape.net>
To: Race Car <land-speed@autox.team.net>
Sent: Tuesday, January 25, 2000 7:42 PM
Subject: Grade 5?
> Hi Everyone,
> I hope to use some shouldered bolts in the front suspension of our
XF/BGMR.
> These bolts are heat treated A574 Alloy Steel. Is this up to grade 5
standards
> as I believe are required for steering use. I would use these bolts for
most
> of the pivots of the a-arms and not really the steering but figured they
> should be held to the same standards. Phil
>
|