land-speed
[Top] [All Lists]

Re: Rear end Updates

To: "Keith Turk" <kturk@ala.net>, <LGMCAFEE@aol.com>,
Subject: Re: Rear end Updates
From: "Jim Dincau" <jdincau@qnet.com>
Date: Tue, 13 Nov 2001 12:55:21 -0800
Hi all,
    It's not just the power requirements that make a 4.88 bad it's the fact
that you have to overdrive the pinion so much to get a usable ratio. If you
put in a 2/1 QC set to get a 2.44 ratio you get 14,00 RPM at the pinion gear
at 7,000 RPM in high gear. It's really hard on the bearings.
Jim in Palmdale

///
///  land-speed@autox.team.net mailing list
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe land-speed
///
///  or go to  http://www.team.net/cgi-bin/majorcool
///
///


<Prev in Thread] Current Thread [Next in Thread>