...Snip
>...If the rope is Manila, like in the "olden days", the climber's body is
>brought to a sudden stop, generating tremendous "G" loads.....
>
>...The development of nylon rope changed the whole character of climbing &
>caving. Nylon stretches as it is pulled taut. This spreads out the time
over
>which the body is brought to a stop, greatly lowering the "G" forces on the
>body and, consequently, the peak tensile load on the rope....
>
>...Special climbing- grade
>nylon rope has been developed to feature an excellent combination of
tensile
>strength, elongation, and energy absorption. These ropes absorb energy as
>they stretch, minimizing injury to the climber and this also reduces
>rebound......
As one of those crazy rock climbing guys I though I should also add to this
that the climbing rope I use is 'certified' for only 12 falls!
(different ropes have different numbers, max is around 14, I think.)
After that the rope is retired (I cut mine up for utility tie-down use).
I keep a special log that records how many falls on each rope.
UV can be a problem (ropes are stored in the dark) and dirt, abrasion,
knots, sharp bends, and sharp rock corners, tend to make one very
conservative
as a rope approaches it's rated limit.
Bottom line is that this kind of rope used as a parachute tether would have
to be replaced after X number of deployments.
Thanks,
Jim.
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/land-speed
/// what is needed. It isn't that difficult, folks.
|