The Stainless Nuts (all one size now, Glen) are going onto hardened steel
studs in an aluminum head the Header baseplate is 1/4 inch mild steel(have I
made a battery yet?)I was hoping using the Stainless Nuts would keep from
seizing them to the studs?
Mike Meierle
#847 F/P/MP
ECTA Record Holder
-----Original Message-----
From: owner-land-speed@autox.team.net
[mailto:owner-land-speed@autox.team.net] On Behalf Of Glen Barrett
Sent: Wednesday, August 02, 2006 12:45 PM
To: Albaugh, Neil; Mike Meierle; Keith Turk; land-speed@autox.team.net
Subject: Re: Glen... don't you even...
Neil
Yeah and he has two sizes of nuts so he said. Or is he just a little nuts
LOL!!!!
Glen
----- Original Message -----
From: "Albaugh, Neil" <albaugh_neil@ti.com>
To: "Glen Barrett" <speedtimer@charter.net>; "Mike Meierle"
<mike.meierle@alcatel.com>; "Keith Turk" <kturk@ala.net>;
<land-speed@autox.team.net>
Sent: Wednesday, August 02, 2006 10:35 AM
Subject: RE: Glen... don't you even...
> Mike;
>
> If you use stainless nuts on stainless bolts, you'd better use a good
> anti- seize compound when you assemble your headers. Stainless tends
> to gall badly, especially at high temperature.
>
> Regards, Neil Tucson, AZ
|