You can convert the old Ford spindle to run ball bearings also. It was common
to do it in the 50's by the fast guys. I could never find the bearing #'s for
the inside but I did the outer bearings 20 years ago. Good Luck
>Subject: Hubs as Spindles
>
>Jon, I have a buddy who has a roadster that has alum frt hubs--with chev
>ball brgs---I have never been able to find the source of them. I am
>running 39 Chevy hubs with six bolts on 4.5x15 wheels on my Lakester---this
>gives me the ball brgs, they will fit early Ford spindles..I hope this
>helps---if you find these alum. B'ville hums I would appreciate learning the
>source.
|