Tom, Use a quartermaster floating hydraulic type TO bearing. You can make a
shim set up that will work.
Doug Odom in big ditch
----- Original Message -----
From: "tom sarda" <sardatech@yahoo.com>
To: <land-speed@autox.team.net>
Sent: Wednesday, June 03, 2009 8:08 PM
Subject: [Land-speed] bellhousing
> Mayf, that suggestion for essentially making the pilot bearing longer
> solves part of the problem. The other part is that the release bearing is
> also .850 in short of contacting the fingers of the pressure plate.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Land-speed mailing list
>
> You are subscribed as dlodom@charter.net
>
> http://autox.team.net/mailman/listinfo/land-speed
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|