> but if you have the inverted type you should fit a longer oil tube to the
> spin on adapter, this will keep the oil from siphoning off after the car is
> shut down
Westley,
I think you have just described my oil filter system. Where does one find a
longer oil tube?
Larry
=================================================================================
=====>
> if you mean the inverted spin on that was used on later cars or the hanging
> type fitted to some. then it is a fram PH43. you may also use a PH8 (which
> is an extended PH43),
> but if you have the inverted type you should fit a longer oil tube to the
> spin on adapter, this will keep the oil from siphoning off after the car is
> shut down, and alow for the oil pressure to build up quicker. rather than
> having to fill the empty area of the filter, then build pressure.
>
>
> it is actually easier than it sounds.
>
> good luck,
>
> westley
>
> >Does anyone know if there is a Fram oil filter that fits in place of the
> >Unipart oil filter for the spin-on conversion?
> >
> >Thanks,
> >Milo
> >
> >
> >
> >
>
|