mgs
[Top] [All Lists]

Re: valve clearance on TD

To: stritle@epix.net
Subject: Re: valve clearance on TD
From: mgbob@juno.com (ROBERT G. HOWARD)
Date: Thu, 16 Oct 1997 06:52:08 EDT
Hi Steve,
  Unless you get some authoritative advice, mine would be to set them at
019 cold and adjust again when hot.  
Bob

On Wed, 15 Oct 1997 12:25:28 -0400 Steven Tritle <stritle@epix.net>
writes:
>Since my rocker assembly is being worked on what clearance should be
>used to set the tappets when cold. I use .019 when hot.
>
>Steve 
>52 TD
>

<Prev in Thread] Current Thread [Next in Thread>