mgs
[Top] [All Lists]

Re: Stuck Tie Rod End Nut

To: BobMGT@aol.com
Subject: Re: Stuck Tie Rod End Nut
From: Robert Allen <boballen@sky.net>
Date: Thu, 16 Oct 1997 09:09:17 -0500
BobMGT@aol.com wrote:

> Well the side with the tear has a stuck lock nut, the one you have to
> loosen
> to get the tie rod out of the ball joint. I don't know if the nut is
> stuck from being deformed or from rust.
> Any ideas on getting it loose?

Yup. First make sure you can acquire a new jam nut. I was just about to
reccomend for you to go out and buy a nut splitter and then it ocurrs to
me that those tools expect you to get the tool all around the nut. Duh.
So now I'd say grind it off. One of those 10,000 RPM 4 inch
mini-grinders has been a great stress-reliever in my garage.

If it's deformed, I wouldn't bother trying to turn it. It could bugger
up the threads on the tie rod.

> BTW, does the rack and the boot share the same oil? In other
> words, will the steering pinion loose its lubrication if there is
> a tear in the boot? When you put the new boot on, do you
> put any kind of lube in it, or does filling the rack with oil take
> care of that?

Yup. That is the purpose of the boot. To hold the oil in. But I think
the oil is mainly for the benefit of the rack and pinion gears. If you
have the tools, it wouldn't hurt to separate the inner tir rod and
repack with grease once you get the boot off.--
Bob Allen, Kansas City, '69CGT, '75TR6, '61Elva(?)
"The qualities of team players are most highly regarded by incompetent
coaches."



<Prev in Thread] Current Thread [Next in Thread>