[Top] [All Lists]

Re: mg bodywork and ? mig welder

Subject: Re: mg bodywork and ? mig welder
From: RJohn50603 <>
Date: Wed, 1 Apr 1998 18:10:03 EST
In a message dated 98-04-01 17:21:02 EST, writes:

<< R.--
 Went to look at the Lincoln Weldpack 100/gas kit you referred to at Home
 Depot and ran into the Lincoln 155 that runs on 230v/20A--total with gas
 kit around $560 & change. I think it's less likely to trip the breaker
 on the 240v circuit than the 100 amp machine will on the 120v/20A
 I gotta think about this some more...
 Thanks again for the advice.
 John V. >>


I recommend that you run the welder on a dedicated, 25 amp circuit. If you do
this, you won't have any tripping probem

R. Johnson - Dallas

<Prev in Thread] Current Thread [Next in Thread>