Jack,
The voltage stabiliser is supposed to provide 10v to the instruments.
Could the genius friend check out the circuitry to see if the lights
could be powered from that? Would require an on-off switch, then could
still be run through the dimmer.....?
Bob
On Fri, 3 Apr 1998 10:23:41 -0600 "Feldman, Jack (Jack)"
<jack@lucent.com> writes:
>Eric,
>
>I believe the RS part number is 272-1133. It is rated at 7 1/2 volts,
>so
>you can't turn the dimmer up too far. The idea is to drive them at a
>higher voltage to get more output with less life. I don't think anyone
>has commented on how long they last. I have a genius friend designing
>a
>voltage regulating circuit to drop the voltage to 10V. Unfortunately
>it
>looks like the B is going to be in storage until my son takes the C
>away, so I can't give any results.
>
>Good luck,
>
>Jack
>
|