I ran into this same thing on my '74 B. I realized there's a sort of
sleeve which holds the distributor drive in. Look for one more bolt
screwed directly into the engine block near the distributor hole. Once
I got that bolt out, the sleeve and distributor drive slid right out.
Matt Kulka
'74 B - with a new distributor. In the box for now, but not for long.
>>> "Andrew Lundgren" <lundgren@iname.com> 04/07/98 09:05pm >>>
I have a '70 MGB. My old cam was damaged so I am getting ready to put
in a new cam shaft. I have everything off except the old cam and the
distributor drive. I have a bold (about 4") screwed into the back of
the drive like the manual says, but I am unable to pull it out...
|