mgs
[Top] [All Lists]

RE: installing carpet

To: Max Heim <mvheim@studiolimage.com>
Subject: RE: installing carpet
From: "Dodd, Kelvin" <doddk@mossmotors.com>
Date: Wed, 17 Mar 1999 11:26:38 -0800
To all carpetty type people.  The type of carpet described here is the
closest generally available from the UK to the cut loop material used on the
70s MGs and Triumphs.  Just like the original it does not have a bound back
and must be installed carefully.  Bound backs tend to make the carpet too
inflexible to fit the contours found in our cars.

FYI

Kelvin


> -----Original Message-----
> From: Max Heim [mailto:mvheim@studiolimage.com]
> Sent: Wednesday, March 17, 1999 10:41 AM
> To: MG List
> Subject: Re: installing carpet
> of the twists of yarn exposed. Here's the killer: if you 
> spread contact 
> cement on the back of these "exposed" pieces, you will need 
> to place that 
> piece of carpet perfectly first try!  because if you try to 
> pull it back 
> up to reposition it, the individual twists of yarn will stick to the 
> floor and pull through the backing material. Thus the section 
> over the 
> wheel well hump behind the seat of my B looks moth-eaten. It 
> is possible 
> that they no longer ship this kind of carpet, but I suggest 
> you look out 
> for it. 

<Prev in Thread] Current Thread [Next in Thread>