mgs
[Top] [All Lists]

Re: Crankcase pressures

To: Mgs@autox.team.net
Subject: Re: Crankcase pressures
From: drded@ix.netcom.com
Date: Sun, 21 Mar 1999 20:20:51 -0600 (CST)
On 03/21/99 20:09:14 you wrote:
>
>Hello all,
>    I finally got my MGB back today, but there's a slight problem...
>
>    As I might have mentioned before, my oil consumption has gone up
>since December on my 'B.  I thought that the crankcase ventilation
>might be plugged, so I cleaned and changed hoses.  Today on my trip
>back, things came to a head.
>
>    I found that the crankcase pressures were blowing my oil filler
>cap off and spewing oil all over my engine bay!  I have no idea why,
>but here's the relevant run-down on what's been done to the car that
>might give you knowledgeable folks a clue...
>
>    *1974 MGB roadster with 80k on the engine
>    *HIF intake replaced with an HS-4 intake, but the HIF's stayed
>the same
>    *Re-filled the carbon canister with 1 inch of carbon
>    *Most emissions in place except for the gulp valve
>    *No vacuum advance on the dizzy
>
>    The car still burns very little oil.  At the most, there is a
>small puff of blue smoke when I hit the throttle, but at no other
>time.  The car leaks some oil, but not too much.  There is no oil in
>the water or vice versa.  The car does not have a vented oil cap.
>
>    What should I look for/change on this car?  Do I need to empty
>the carbon canister like it was before?  Is there something plugged
>somewhere?  Should I buy a vented valve cover?  Should I change the
>intake back to the original HIF-style, or won't it make a
>difference?
>
>    Before I made the above-mentioned changes, I would get about 800
>miles before I needed to add a quart of oil - now I have to add a
>quart every 200 miles!  In case it means anything, the car still
>runs very strong with no misses or power loss.  In fact, I got 30
>mpg today!
>
>    Anyway, I'd love to hear what you've got to say.  I need to
>drive this car, and I can't afford to pay for a lot of oil!  Thanks!
>
>Michael S. Lishego
>http://www.mgb.bc.ca/virtualgarage/
>
>
>

Is your tappet cover vent line kinked or obstructed in anyway? Adam's 72 B had 
a kinked vent 
line from the tappet cover which resulted in forcing oil passed the rear seal 
and even pushing 
the oil dip stick out of the tube. 

David Deutsch 


<Prev in Thread] Current Thread [Next in Thread>